点击图片查看大图LV-F 精密型矫直机
PRECISION STRAIGHTENER
特点 Speacial Features
用17支工作滚轮去除材料的残留应力。高水平地实现产品的平坦度，充分满足精密加工中的精度要求。
17 smaller diameter work rolls remove the coil set from the material and ensure the high level material that precision processing demands.
上部滚轮采先进4点式分厘表微调装置，适矫直机精密度要求较高的加工品质需求。
The upper work rollers adop 4 point fine micro adjusters with reading
indicators ,High quauilty and precicion.
滚轮材质采轴承钢（SUJ2），经热处理淬火HRC60°后镀硬铬再研磨；硬度高、耐磨、寿命长。
All rolls are made of bearing steel(SUJ2),have all been quenched ,hard-chrome plated and ground with min.HRC60°.
采用日本制精密培林，精密度高，寿命长。加装齿轮组黄油润滑装置。
Japanese bearings—high precision and durable.Add gear lubrication system.Quality guarantee.
可配合任何送料机使用。
Campatible with other feeders.
|
型式 Model |
LV |
LV |
LV |
LV |
LV |
LV |
|
最大料宽 Max Material Width(mm) |
150 |
200 |
300 |
400 |
500 |
600 |
|
材料厚度 Material Thickness(mm) |
0.1～1.5 |
0.1～1.3 |
0.1～1.2 |
|||
|
送料速度 Speed(M/Min) |
6～24 |
|||||
|
马达 Motor (HP) |
1 |
2 |
3 |
|||
|
变频器 Inverter |
有 Provided |
|||||
|
矫直滚轮 Work Rolls |
上/Upper 8 下/Lower 9 全驱动 All Drive Function |
|||||
|
导料滚轮 Pinch Rolls |
上/ Upper 1 下/ Lower 1 全驱动 All Drive Function |
|||||
|
背压滚轮 Back Up Rolls |
无 N/A |
有 Porovided |
||||
|
调整装置 Adjustment |
四点式分厘表微调 4Point Fine Micor Adjustment |
|||||
|
感应方式 Loop Control |
感应台式 Touch Sensor |
|||||
|
开口装置 Work Roll Opening |
手动操作 Manual Operation |
|||||
|
驱动方式 Drive Method |
侧齿轮方式全滚轮驱动 All Rolls are Driven with Side Gear |
|||||
规格Specifications
※ 特殊规格依客户需求洽商订制
※ Any specification available. Custom-made orders welcome
